How to Fix a Composite Door Replacement Lock
Many homes have composite doors fitted for their attractive good looks, improved security and insulating properties. The majority of problems with these doors are caused by faulty mechanism and can often be fixed without the need to replace the door.
The most frequent issue is a lock that is sticky that develops when it becomes difficult to put it in or turn the key. It is possible to fix this problem by lubricating the door lock's internal mechanisms.
Warped Doors
Composite doors are incredibly durable, durable and long-lasting but that doesn't mean they're impervious to damage or issues. Warping and inability to open your doors properly are two of the most common problems with composite doors. Certain of these issues are easily fixed however others require more work and maintenance.
Warping is a problem for composite and timber doors. This happens when the materials change in shape and bend over time as a result of being exposed to temperature and moisture. This can cause the door to be stiff and difficult to open or close, and can also affect how well it functions as an lock. One way to stop warping is selecting a high-quality composite door with a coating or finish which shields it from UV and moisture rays.
Another common composite door problem is stuck locks. The lock mechanisms and handles can become covered in dirt, dust or other debris, making it difficult to lock or unlock the door. In the worst scenario, this can cause home security issues because it's easy for unauthorized individuals to gain access to your property. Cleaning your composite doors frequently using a damp, clean cloth and applying a silicone or graphite-based fluid every six months will keep this from happening.
The drainage systems inside your composite doors can also become blocked, which causes water to leak into your home. This usually happens because the weather seals have become dislodged and no longer pushing firmly against their tracks. This problem can be prevented by making sure they are in the correct position and pushing them back in the correct position.
The hinges of your composite doors could slide down over time and cause them to snag. This can be due to many factors, including moisture changes, excessive heating, or not closing the doors correctly. Adjusting the hinges using a flathead screwdriver, hex-key and Phillips-head screws will solve this issue. In addition applying a lithium-based oil to the hinges once every six months can help to prevent this from occurring.
Faulty locks
Composite doors are durable and durable. However this doesn't mean they are impervious to damage and issues. These issues, whether swelling or warping or even keys that won't turn, can affect the security and performance of your door. Fortunately, most of these issues can be fixed using the right tools and expertise.
Faulty locks are a problem for both uPVC doors and composite doors. Composite doors tend to have fewer problems than uPVC doors because of their construction. In most cases, the lock could require replacement or it could be a matter of adjusting the locking mechanism and lubricating the keyhole. To avoid damage, it's best to use graphite lubricants, like WD-40 on the lock's cylinder and the key.
If you're having trouble to open or close your composite door the locking points could be out of alignment. The mechanism of the lock could be malfunctioning. In this case it is essential to call an expert locksmith to make sure that the door is in its correct position and that the lock works correctly.
The main cause of the problem with a lock that is defective on a composite door comes due to the expansion of the material used to manufacture the doors. This is usually due to an increase in humidity or damp conditions and can result in the locking mechanisms not being able to engage correctly.
This can lead to doors that are difficult to open or close, and can put your home's security in danger.
It is important to establish the habit of 'throwing the handle' when closing and locking your composite doors. This will engage all the different locking points down the door, not only rely on the latch in the middle which could leave the top and bottom of your composite doors vulnerable to swelling and warping. This will not only guarantee that the lock is working but also increase the energy efficiency of the door.
Sticky Locks
Locks that are stuck are a frequent problem that can affect any type of door. This issue can be quickly and easily fixed by following a few easy steps. These tips will help keep your door lock made of composite in good working condition.
One of the most common reasons why locks become sticky is because the internal components are getting worn out. As time passes, the metal surfaces on the pins and springs of the tumblers, springs and pins begin to wear out, causing friction and dirt to build up. This gunk can make it difficult to turn the key, and also damage the lock.
Utilizing a powdered graphite solution or a Teflonbased lubricant, or PTFE, can help prevent these problems. WD-40 Dry lubricant is a very popular choice and can be found at a variety of DIY stores. Simply use the can's straw to apply a small amount grease directly to the lock mechanism. Then, slide your key in and out of the lock several times to spread the lubricant across the entire lock. Make sure to clean off any excess lubricant afterward so that it doesn't attract more dirt and dust.
Another important aspect to think about is how you close your composite door. By pounding the door or applying too excessive pressure on the handle could cause the lock mechanism to wear out faster, which can cause it to stick. Also, keeping the door open for extended periods of time can increase the moisture levels in the home and cause warping or mould on the frame and door.
While it's easy to take your door's locks for granted, as they function as they should it is vital to regularly maintain them to ensure that they continue to work correctly. These guidelines will help keep your new door lock made of composite in good condition and ensure that your home remains safe. It's best to consult an expert locksmith if you discover that your locks don't work as they should. They can look over the lock to determine the best solution to fix or replacement.
Key Won't Turn
Composite doors are stylish, modern look and offer enhanced security and insulation. They are available in a variety of colours and finishes to match your home's personality and decor. Although composite doors are durable they require regular maintenance to stay in top condition. Minor issues with composite doors can be fixed relatively easily such as stuck doors or ones that are not aligned properly.
Often, composite doors become difficult to open or lock due to a poorly-fitting frame, expansion caused by changes in weather conditions, or due to aging of the internal mechanism. In these cases the most common solution is to adjust the hinges and strike plate so that they fit snugly into the frame and are easy to open and close. You may also need to clean the locking mechanism to remove any obstructions.
If the key won't turn inside the lock, the internal locking mechanism may be defective. It must be replaced. This requires professional Locksmith assistance. Christopher the Locksmith offers a fast and convenient service, providing you with locks that are similar to yours at competitive prices.
The best way to avoid these issues is to keep the hardware and door frame in good condition. This means cleaning them regularly to get rid of dirt and grime, as well as applying lubricant to the hinges and lock mechanism. To avoid further damage, apply a lubricant designed specifically for locks and doors.
A further preventive measure to make is to always put the handle in the middle when closing the door using a composite (also called throwing the doors). This will ensure that the locking points of the door are properly engaged and reduce the risk of warping or causing damage.
It's also recommended that you replace your old composite doors with a security Kite Marked cylinder. epsom composite door repairs will greatly reduce the chances of your composite doors being broken into since they have anti-drill, anti-bump and anti-snap safety. Many insurance companies now require this as part of your home insurance policy. If your doors made of composite are damaged in an attempted break-in, it is highly recommended that you contact an Locksmith as soon as possible to repair or replace it to prevent further damage.